The mobile boarding bridge is an auxiliary equipment for loading and unloading goods used in conjunction with the forklift. The height can be adjusted according to the height of the car compartment. The forklift can directly drive into the compartment through this equipment for batch loading and unloading of goods. Only one person can work to achieve rapid loading and unloading of goods. It enables enterprises to improve work efficiency, reduce a lot of labor and obtain greater economic benefits.

產品特點

Product features

臺面采用特制的菱形網格板有可靠的強度，能保證長期使用而不變形。它的菱形網狀結構，充分保證了防滑性能，使叉車有更好的爬坡性和可操縱性。即使在雨、雪天氣，仍能保證正常使用?？烧{(diào)節長度的索鏈能方便地鉤住貨車，使移動式登車橋與貨車始終緊密貼合。采用手搖液壓泵作動力，勿需外接動力電源即可輕松實現登車橋的高度調節。配置的剎車墊可有效防止貨車裝卸時登車橋移位。

The table top is made of special diamond grid plate with reliable strength, which can ensure long-term use without deformation. Its rhombic mesh structure fully ensures the anti-skid performance, and makes the forklift have better climbing ability and maneuverability. Even in rainy and snowy weather, it can still ensure normal use. The cable chain with adjustable length can easily hook the truck, so that the mobile boarding bridge and the truck always fit closely. The manual hydraulic pump is used as the power, and the height adjustment of the boarding bridge can be easily realized without external power supply. The equipped brake pad can effectively prevent the shift of the boarding bridge during loading and unloading of the truck.

產品結構

product mix

采用特制異型鋼管，臺面采用特制的菱形網格板，防滑(網)板。它的波形鋼格網狀結構，充分保證了防線。產品性能，使叉車有更好的爬坡性和可操縱性。配置的剎車墊（可有效防止貨車裝卸時液壓登車橋移位）?？烧{(diào)節長度的索鏈能方便地鉤住貨車，使登車橋與貨車始終緊密貼合。

Special shaped steel pipes are used, and the table top is made of special diamond grid plate and anti-slip (mesh) plate. Its corrugated steel lattice network structure fully guarantees the line of defense. The product performance makes the forklift have better climbing ability and maneuverability. Equipped brake pad (which can effectively prevent the displacement of hydraulic boarding bridge during truck loading and unloading). The cable chain with adjustable length can easily hook the truck, so that the boarding bridge and the truck always fit closely.

了解移動式登車橋的結構和組成部件，有助于我們更好的使用和維護登車橋，發揮它的作用。給您介紹移動式登車橋的結構。部位1為尾板，尾板是一個高度較低的小型斜坡，工作時，尾板落下，便于叉車駛上登車橋。登車橋工作臺斜坡部位，斜坡底部為移動式登車橋的承重底架，斜坡臺面有高強度防滑花紋板和高強度鋼格板兩層臺面組成，高強度鋼格板能增加叉車的摩擦力，便于爬坡，斜坡的角度可以通過液壓操作桿調整，為了便于叉車上下，斜坡角度不宜過大。油缸，是調整登車橋高度（斜坡角度）的直接執行機構。

Understanding the structure and components of the mobile boarding bridge will help us better use and maintain the boarding bridge and play its role. The structure of the mobile boarding bridge is introduced to you. Part 1 is the tailboard. The tailboard is a small slope with a low height. When working, the tailboard falls down to facilitate the forklift to drive onto the boarding bridge. At the slope of the working platform of the boarding bridge, the bottom of the slope is the load-bearing underframe of the mobile boarding bridge. The slope table is composed of two layers of high strength anti-skid pattern plate and high strength steel grating. The high strength steel grating can increase the friction of the forklift and facilitate climbing. The angle of the slope can be adjusted by the hydraulic operating rod. In order to facilitate the forklift up and down, the slope angle should not be too large. The oil cylinder is the direct actuator for adjusting the height (slope angle) of the boarding axle.

移動式登車橋的輪胎和車軸，它便于移動式登車橋移動轉移。手動液壓系統，它包括手動操作桿、手動液壓泵和油箱，通過操作操作桿，在手壓泵的作用下，把油箱里的油壓入油缸，從而驅動登車橋上升，下降時，打開回油閥，登車橋在自身重力作用下自然下降。為護欄，它能有效的防止叉車意外從登車橋上跌落。部位7為手搖支撐腿，根據作業車輛車廂高度調整好登車橋高度后，通過手搖支撐腿搖柄把支撐腿高度降到地面后鎖定。支撐腿能承載叉車和貨物大部分的重力，有效地減施加在作業車輛車廂上的壓力。

The tires and axles of the mobile boarding bridge are convenient for the mobile boarding bridge to move and transfer. The manual hydraulic system includes the manual operating lever, the manual hydraulic pump and the oil tank. Through the operating lever, under the action of the manual pump, the oil pressure in the oil tank is put into the oil tank, so as to drive the boarding bridge to rise. When lowering, open the oil return valve, and the boarding bridge will fall under its own gravity. As a safety barrier, it can effectively prevent the forklift from accidentally falling off the boarding bridge. Part 7 is the hand-shaking support leg. After the height of the boarding bridge is adjusted according to the height of the operating vehicle carriage, the height of the support leg is lowered to the ground through the hand-shaking support leg crank and then locked. The support leg can bear most of the gravity of the forklift and cargo, effectively reducing the pressure exerted on the working vehicle compartment.

以上的精彩內容均來自：升降機廠家更多的精彩內容請點擊進入我們的網站：http://shyulang.cn進行交流學習，我們后續會不斷的為您提供分享，敬請期待！

The above highlights are from: For more highlights from lift manufacturers, please click to enter our website: http://shyulang.cn We will continue to share with you in the future!