I The wear of mechanical equipment is generally divided into three stages. In the operation stage, due to the rough appearance and shape of the punch pair and some small errors in the installation, the smoothness of wear is poor. It is found that the load is too large and the appearance of conflict is seriously worn;

二.正常磨損時的液壓升降

2、 Hydraulic lifting under normal wear

三.升降機的機械運動中會出現沖突，當發生沖突時，必然會發生磨損。磨損的三個基本規律是：體積磨損與沖突對的相對滑動間隔成正比；與正常載荷成正比；與承載強度或硬度成反比。根據力學理論和后續試驗的結果表明，磨損率與沖突元素的關系較弱，沖突元素的差異為一個數量級，磨損率可分為三個定量級，因此沖突因素的變化可以忽略。

III There will be conflicts in the mechanical movement of the elevator, and when conflicts occur, wear will inevitably occur. The three basic rules of wear are: volume wear is proportional to the relative sliding interval of conflict pairs; It is proportional to the normal load; It is inversely proportional to the bearing strength or hardness. According to the results of mechanical theory and subsequent tests, the relationship between wear rate and conflict elements is weak, the difference between conflict elements is an order of magnitude, and the wear rate can be divided into three quantitative levels, so the change of conflict factors can be ignored.

如果升降機本身的重量更重，設備的質量越好，這個說法就不完全正確，但并不意味著它是不合理的。接下來，升降機生產廠家小編會告訴你升降平臺的重量對工作的影響。

If the weight of the lift itself is heavier and the quality of the equipment is better, this statement is not completely correct, but it does not mean that it is unreasonable. Next, the elevator manufacturer will tell you the impact of the weight of the lifting platform on the work.

以上就是為大家介紹的有關升降機廠家的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://shyulang.cn

The above is a detailed introduction to the elevator manufacturers. I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services http://shyulang.cn