When using the aluminum alloy elevator, it is inevitable to encounter some unexpected situations, such as the sudden increase in the noise of the aluminum alloy elevator. What are the factors causing the increase in the noise of the aluminum alloy elevator?

1.鋁合金式升降機各支臂或支桿銜接的軸套或軸因為長期缺少潤滑油致使鋁合金式升降機升降時噪音 變大,在這種狀況下,可以加注潤滑油,假如加潤滑油仍不起作用,則要查看各個軸套或軸的磨損狀況,假如磨損嚴峻,則需求替換軸套或軸.

1. the axle sleeve or shaft connected with each support arm or support rod of the aluminum alloy elevator has become noisy during the lifting and lowering of the aluminum alloy elevator due to the long-term lack of lubricating oil. In this case, the lubricating oil can be filled. If the lubricating oil still does not work, the wear condition of each axle sleeve or shaft should be checked. If the wear is severe, the axle sleeve or shaft should be replaced

2.升降高度較高的鋁合金式升降機富含導軌時,假如導向輪或側向輪的軸承損壞,在升降過程中,導向輪與導軌沖突時也會發生尖銳的噪音.呈現這種狀況,可以替換磨損嚴峻的導向輪軸承.

2. when the aluminum alloy elevator with high lifting height is rich in guide rail, if the bearing of the guide wheel or lateral wheel is damaged, sharp noise will also occur when the guide wheel conflicts with the guide rail during lifting In this case, the severely worn guide roller bearing can be replaced

3.鋁合金式升降機升降組織上、下臺面的滾輪磨損變形嚴峻或外表滑潤度差,致使?jié)L輪在導向槽里移動時發生噪音大或鋁合金式升降機晃動.

3. the rollers on the upper and lower tables of the lifting organization of the aluminum alloy elevator are severely worn and deformed or have poor surface smoothness, resulting in loud noise or shaking of the aluminum alloy elevator when the rollers move in the guide groove

呈現這個故障的因素主要有幾點:滾輪加工精度不行,外表潤滑度差;滾輪沒有經過熱處理,硬度不行;導向槽外表粗糙,潤滑度差,加重了滾輪磨損.

There are several main factors that present this fault: the processing accuracy of the roller is not good, and the surface lubrication is poor; The roller has not been heat treated, so the hardness is not good; The guide groove has rough surface and poor lubrication, which aggravates the wear of the roller

呈現這種狀況,應替換合格的滾輪,假如導向槽外表粗糙,也應多導向槽的外表進行處理.

In this case, the qualified roller shall be replaced. If the guide groove surface is rough, the surface of multiple guide grooves shall also be treated

4.也應鋁合金式升降機因為長期缺少潤滑油運轉,滾輪軸承損壞,致使?jié)L輪在移動式發生振蕩或較大的噪音.處理辦法很簡單,替換滾輪軸承即可.

4. it should also be noted that the roller bearing of the aluminum alloy elevator is damaged due to the long-term lack of lubricating oil, resulting in vibration or large noise of the roller in the mobile type The solution is very simple. Replace the roller bearing

以上就是為大家介紹的升降機廠家http://shyulang.cn有關的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務.

The above is the elevator manufacturer introduced to you http://shyulang.cn I hope that the detailed introduction to the will be helpful to you If you have any questions, please contact us We will provide you with professional service