升降貨梯是當今社會施工工地中不可缺少的機器設備，不僅會使用在大型的施工場現場，日常的家庭裝修上面也是會經常使用到的，由此可見升降機是不可或缺的。

The cargo elevator is an indispensable machine and equipment in today's social construction site. It will be used not only in large construction sites, but also in daily home decoration. It can be seen that the elevator is indispensable.

然而在使用過程中會由于操作使用不當導致升降機經常會出現一些故障，今天升降機生產廠家就日常經常出現的幾種故障講解一些應急處理方法。

However, in the process of use, the elevator will often have some faults due to improper operation and use. Today, the elevator manufacturer will explain some emergency treatment methods for several daily faults.

一、鋼繩斷裂—有些客戶在剛投入使用升降機中沒有一個準確的把握，一開始都是想運輸什么就運輸什么，忽略了機器本身超載負荷的問題，這就會導致升降機在長時間使用過程中造成鋼繩不斷的斷裂，因為鋼繩都是由幾十條鋼絲纏繞而成的，正常使用的情況下是不會一次性全部斷裂，隨著使用期限的增長磨損都是循序漸進的，所以升降機廠家提醒大家在使用過程中一定要考慮機器的負荷標準，以免使用中因超載負荷產生隱患。

1、 Broken steel rope - some customers do not have an accurate grasp of the elevator when it is just put into use. At the beginning, they transport whatever they want to transport, ignoring the overload of the machine itself, which will lead to the continuous breaking of the steel rope during the long-term use of the elevator, because the steel rope is wound by dozens of steel wires, Under normal use, it will not break all at one time. With the growth of service life, the wear is gradual. Therefore, the elevator manufacturer reminds everyone to consider the load standard of the machine in the process of use, so as to avoid hidden dangers caused by overload load in use.

二、齒輪打滑—這個問題也是廣大客戶在使用過程中經常見到的情況，如果懂機械的人就會用較老的方法，向齒輪之間撒一把干土，這樣就能夠增加齒輪的摩擦力。齒輪打滑原因就是物體太重，齒輪的力度無法提起物體的重力，這就很容易導致齒輪打滑，我們也可以找一個稍微大一點的齒輪替換就可以輕松解決齒輪打滑問題。

2、 Gear slip - this problem is often seen by customers in the process of use. If people who understand machinery will use the older method to sprinkle a handful of dry soil between the gears, which can increase the friction of the gears. The reason for gear slip is that the object is too heavy, and the strength of the gear can not lift the gravity of the object, which can easily lead to gear slip. We can also find a slightly larger gear to replace it, which can easily solve the problem of gear slip.

三、電源跳閘—使用升降機的時候也經常遇見電源跳閘的事情，這是因為升降機在工作的時候需要消耗很強的電壓，如果達不到工程用電標準，就會出現電源跳閘情況。所以在我們在安裝使用前應該重新引出一條線路供設備用電使用，這樣就不會出現跳閘的情況，如果嚴重的話就不是跳閘那么簡單了，很可能把整個線路燒壞，所以升降機廠家提醒大家一定要注意日常細節。

3、 Power trip - power trip is often encountered when using the elevator. This is because the elevator needs to consume a strong voltage when working. If it fails to meet the engineering power consumption standard, power trip will occur. Therefore, we should re lead out a line for standby power before installation and use, so that there will be no tripping. If it is serious, it will not be as simple as tripping, and it is likely to burn out the whole line. Therefore, the elevator manufacturer reminds you to pay attention to daily details.